30hl 30bbl Beer Carbonation Tank
- HBETBREW
- Shangdong, China
- Within 30days
- 200sets/month
1. Welding: We abandoned the argon gas cylinder but adopt The Central System of Argon to make sure the TIG welding with pure argon gas shield. We also increase the using amount of gas when welding, so the quality of the welding line is more higher. vertical horizontal brite bright beer tank bbt
2.Dimpling: We adopt dimple plate rather than belt for glycol jacket, since it can increase the cooling area and improve the speed of cooling. The most important thing in brewing process is to avoid contaminating, that is to say the most important thing in producing beer equipment is to polish the inside tanks to 0.4~0.6 μm without dead corner. vertical horizontal brite bright beer tank bbt
3.Polishing: We use large-scale polishing equipment to polish the inside of the tanks -- all over the wall to make sure there is no dead corner. You need not worry about there will be some bacterias remained after cleaning.Some other manufacturers may not pay enough attention to the polishing, even some have no polishing machine. vertic
30HL 30BBL Beer Carbonation Tank
Specification of 30HL Beer carbonation tank:
Effective volume: 3000L,
Total volume:3500L
Dimensions: φ1800*2900mm
Inner–jacket (SUS304), TH=3.0mm, Pickling passivation
External-Jacket(SUS304), TH=2.0mm
Dish head (SUS304), TH= 3.0mm.
Insulation: PU-thickness: 100mm.
Glycol jacket: dimpled plate on cone and side.
Cooling media: glycol water or alcohol water.
Stringent jacket leakage test by water and pressured gas.
150° degree cone bottom
CIP arm with 360°coverage CIP spraying ball.
Side shadowless manway: 340*440mm.
Dry hops port on the top of tanks with solid end cap
Full sanitary sample valve
Mechanical relief valve 2bar on CIP arm
Shockproof pressure gauge on CIP am
Rotating racking arm and port on cone with butterfly valve
PT100 Temperature sensor for high accuracy temperature control
Design pressure 0.3MPa;
Working pressure 0.15Mpa.
100% TIG welded joints;
4pcs completely SUS304 heavy duty legs with leveling pad and legs support
Complete valves, fittings and all parts
Specification of 30BBL Beer carbonation tank:
Effective volume: 30BBL,
Total volume:3500L
Dimensions: φ1800*3050mm
Inner–jacket (SUS304), TH=3.0mm, Pickling passivation
External-Jacket(SUS304), TH=2.0mm
Dish head (SUS304), TH= 3.0mm.
Insulation: PU-thickness: 100mm.
Glycol jacket: dimpled plate on cone and side.
Cooling media: glycol water or alcohol water.
Stringent jacket leakage test by water and pressured gas.
150° degree cone bottom
CIP arm with 360°coverage CIP spraying ball.
Side shadowless manway: 340*440mm.
Dry hops port on the top of tanks with solid end cap
Full sanitary sample valve
Mechanical relief valve 2bar on CIP arm
Shockproof pressure gauge on CIP am
Rotating racking arm and port on cone with butterfly valve
PT100 Temperature sensor for high accuracy temperature control
Design pressure 0.3MPa;
Working pressure 0.15Mpa.
100% TIG welded joints;
4pcs completely SUS304 heavy duty legs with leveling pad and legs support
Complete valves, fittings and all parts
